Where to find AIR SCRUBBER 2100 CFM in Chicago

Image for reference only
Actual item may look different
Click on image for larger view

KEY: 225-0500

Manufacturer: ABATEMENT

Model: PAS 2400

Daily: $115.00

Weekly: $460.00

Quantity: for a period of  
day(s)   week(s)  

Additional Information

  • Rated Airflow*: 700-2,100 cfm
  • Air Changes Per Hour: 6 ACH in areas up to 18,000-21,000 ft
  • Filters:
  • Stage 1 pre-filter - Inexpensive, 1 -deep FIBER-TRAPPER 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
  • Stage 2 pre-filter - Pleated, 2 -deep filter for medium-sized particulates (10-100 microns)
  • Stage 3 pre-filter (not included) - High-capacity 2""-deep VAPOR-LOCK carbon filter for gases & odors
  • Final stage HEPA filter - High-capacity, for 0.1-10 micron particles, certified test efficiency of 99.97% or higher @ 0.3 microns, metal-frame
  • Net Weight with Filters: 170 pounds
  • Dimensions (L x W x H): 31.50 L x 25.25 W x 49.75 H
  • Power Supply Requirements: 120 VAC, 60Hz, 15 amps
  • Normal Operating Current: 12 amps or less (safe for 15A circuits)
  • Electrical Safety: NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
  • Motor: High-efficiency type, 3,450 RPM, 1.5 HP
  • Backward Curved Blower: Anodized-Aluminum, 5.5 peak static lift
  • Controls: Off/High/Low-speed selector switch, green power indicator lamp, separate amber Replace Pre-filter and replace HEPA lamps, hour meter, resettable pop-out 12A circuit breaker
  • Cabinet Material: 20 gauge stainless steel construction with solid, aircraft-type rivets
  • Built-in Dolly: Two-wheel dolly with 10 solid, non-marking rubber rear wheels, 360 swivel front casters and a secure top handle for easy movement & control
  • Easy to Replace Pre-Filters: Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
  • Pre-Filter Mounting: Separate slide-in compartments for up to 3 pre-filter stages
  • Inlet/Outlet Manifold - Molded slide-in plastic manifold for attaching 12 inlet or outlet ducting (one included)
  • Airflow rating estimates are based on factory and independent testing @ 120 VAC with an air straightener and a traverse of readings taken with a computing vane-anemometer. Actual results may vary for various reasons, including motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and inlet and outlet ducting will reduce airflow. Use these ratings as a general guideline only.
* Note: Our website does not contain our entire inventory selection and not all items are available at all locations. Please contact us if you do not see what you need or have a question about a product or project! Prices do not include EPP, delivery, or tax and are subject to change without notice. Please call us for special rates on extended rental periods of 3 weeks or more.